Understanding Saddle Flashings

Understanding Saddle Flashings

Understanding Saddle Flashings

Here at CS we love a good flashing!

Saddle flashings can be a complex and high risk junction which, if not designed and built correctly, can be a key contributor to water ingress. This is a typical example of the end result of our in-depth detailing and it’s also a typical example of the collaboration between designer and contractor. We tackle junctions such as these head-on and leave nothing to chance.  

After a site measure (and, if required, a cardboard template) this 2.0mm custom welded aluminium flashing is fabricated offsite then brought to site for fitting. It’s then taken away for powdercoating and returned for final fitoff.   

No folded colorsteel or sealant here. And while the process is more involved, the results will speak for themselves. 

  • slide
  • slide
  • slide

TAURANGA STUDIO

LEVEL 1, MORELAND HOUSE
353 DEVONPORT ROAD, TAURANGA

Ph. 07 543 3030

Email us here.

MAIL US
PO BOX 15 296
TAURANGA 3110

QUEENSTOWN STUDIO

OFFICE 4, UNIT 23
159 GORGE ROAD,
QUEENSTOWN

Ph. 03 441 3031

 

subscribe to our ENews

Stay in the loop!

Copyright © 2021 Creative Space. All rights reserved | Sitemap | Privacy | Proposal Builder Login


TOP
Website by JeRo and Smith Design